Basic Civil Engineering | 2.3K plays

1.

Multiple Choice

1 min

1 pt

In LAYOUT FINALISATION, which of the following is not the Secondary Details :-

Future expansion of switchyard should be easily possible

In seismic prone zones height of structures should be as low as possible.

Location and Orientation of Main Entry of Switchyard

The outgoing transmission line should not cross each other

2.

Multiple Choice

1 min

1 pt

For Field Test , Significant depth of Exploration For isolated fdn :

0.5 to 1 times the width

1.5 to 2 times the width

2.5 to 4 times the width

None

3.

Multiple Choice

1 min

1 pt

For Field Test , Significant depth of Exploration For Pile fdn :

1m to 5m

5m to 15m

20m to 35m

4.

Multiple Choice

1 min

1 pt

In reamed piles type of Deep Foundations :-

are constructed to a depth of 1 to 3m into the ground

are constructed to a depth of 3 to 8m into the ground

are constructed to a depth of 10 to 18m into the ground

None

5.

Multiple Choice

1 min

1 pt

In Friction piles type of Deep Foundations :-

Terminated at Lower depth

Terminated at Higher depth

Terminated at Average depth

None

6.

Multiple Choice

1 min

1 pt

What is the MINIMUM REQUIREMENT of Contour survey extending outside the boundary wall on all sides :

up to at least 2 m

up to at least 5 m

up to at least 10 m

None

7.

Multiple Choice

2 mins

1 pt

Which of the following is not the type of Substation Structure :

Gantry Structure–DP / Lattice

Outgoing Feeder–RSJ Pole (DP)

Road / River Crossing RSJ / Tubular / Lattice

Equipment Support Structure –DP / Lattice

8.

Multiple Choice

2 mins

1 pt

Which of the following is not the type of Line Structure :

DTR Structure –SP / DP PSC / RSJ / Tubular

Equipment Support Structure –DP / Lattice

Road / River Crossing RSJ / Tubular / Lattice

None

9.

Multiple Choice

3 mins

1 pt

Which of the following is not correct for Pole Structures :

The pole shall be erected such that minimum 1/6th of the total length of the pole shall be embedded into the ground surface

Orientation of Poles structures shall be according to the loading or stringing direction

The loading on the poles can be exceeded its design capacity, consider a considerable factor of safety on loads as the poles are manufactured in un-monitored conditions

The pole shall be erected such that minimum 1/6th of the total length of the pole shall be embedded into the ground surface

10.

Multiple Choice

1 min

1 pt

Which of the following is not the type of Pole Foundation :

Rectangular

Circular

Pyramidal

None

11.

Multiple Choice

1 min

1 pt

Which of the following is not Minor Equipment :

LA

CT

HG Fuse

Isolator

12.

Multiple Choice

1 min

1 pt

Which of the following is not Major Equipment :

AB Switch

VCB

Transformer

HG Fuse

13.

Multiple Choice

45 sec

1 pt

Which of the following is type of Transformer Foundation:-

Pedestal Type

Block Type

Both of the above

None

14.

Multiple Choice

1 min

1 pt

For Thermal Expansion and Contraction and to resist Sway Caused by Wind in Boundary Wall :-

Expansion joint at Every 2‐5 m

Expansion joint at Every 4‐8 m

Expansion joint at Every 12‐15 m

None

15.

Multiple Choice

45 sec

1 pt

Which of the following is not the type of Road :

Flexible Pavement

Rigid Pavement

WBM Road Foot Path

Wooden Pavement

16.

Multiple Choice

1 min

1 pt

What is WBM Road Foot Path :-

Water Bound Macadam

Water Below Main Road

Water Between Main Road

Water Bounded by main road

17.

Multiple Choice

1 min

1 pt

ELECTRICAL CONDUITS should be laid :-

AFTER PLASTERING

AFTER PAINTING COMPLETED

DURING BRICK WORK

NONE

Explore this activity with a free account