Have an account?
Skip to Content
Build your own quiz
Suggestions for you
Professional Development
Professional Development
Basic Civil Engineering
17 questions
Show Answers
See Preview
- 1. Multiple Choice
In LAYOUT FINALISATION, which of the following is not the Secondary Details :-
Future expansion of switchyard should be easily possible
In seismic prone zones height of structures should be as low as possible.
Location and Orientation of Main Entry of Switchyard
The outgoing transmission line should not cross each other
- 2. Multiple Choice
For Field Test , Significant depth of Exploration For isolated fdn :
0.5 to 1 times the width
1.5 to 2 times the width
2.5 to 4 times the width
None
- 3. Multiple Choice
For Field Test , Significant depth of Exploration For Pile fdn :
1m to 5m
5m to 15m
20m to 35m
- 4. Multiple Choice
In reamed piles type of Deep Foundations :-
are constructed to a depth of 1 to 3m into the ground
are constructed to a depth of 3 to 8m into the ground
are constructed to a depth of 10 to 18m into the ground
None
- 5. Multiple Choice
In Friction piles type of Deep Foundations :-
Terminated at Lower depth
Terminated at Higher depth
Terminated at Average depth
None
- 6. Multiple Choice
What is the MINIMUM REQUIREMENT of Contour survey extending outside the boundary wall on all sides :
up to at least 2 m
up to at least 5 m
up to at least 10 m
None
- 7. Multiple Choice
Which of the following is not the type of Substation Structure :
Gantry Structure–DP / Lattice
Outgoing Feeder–RSJ Pole (DP)
Road / River Crossing RSJ / Tubular / Lattice
Equipment Support Structure –DP / Lattice
- 8. Multiple Choice
Which of the following is not the type of Line Structure :
DTR Structure –SP / DP PSC / RSJ / Tubular
Equipment Support Structure –DP / Lattice
Road / River Crossing RSJ / Tubular / Lattice
None
- 9. Multiple Choice
Which of the following is not correct for Pole Structures :
The pole shall be erected such that minimum 1/6th of the total length of the pole shall be embedded into the ground surface
Orientation of Poles structures shall be according to the loading or stringing direction
The loading on the poles can be exceeded its design capacity, consider a considerable factor of safety on loads as the poles are manufactured in un-monitored conditions
The pole shall be erected such that minimum 1/6th of the total length of the pole shall be embedded into the ground surface
- 10. Multiple Choice
Which of the following is not the type of Pole Foundation :
Rectangular
Circular
Pyramidal
None
- 11. Multiple Choice
Which of the following is not Minor Equipment :
LA
CT
HG Fuse
Isolator
- 12. Multiple Choice
Which of the following is not Major Equipment :
AB Switch
VCB
Transformer
HG Fuse
- 13. Multiple Choice
Which of the following is type of Transformer Foundation:-
Pedestal Type
Block Type
Both of the above
None
- 14. Multiple Choice
For Thermal Expansion and Contraction and to resist Sway Caused by Wind in Boundary Wall :-
Expansion joint at Every 2‐5 m
Expansion joint at Every 4‐8 m
Expansion joint at Every 12‐15 m
None
- 15. Multiple Choice
Which of the following is not the type of Road :
Flexible Pavement
Rigid Pavement
WBM Road Foot Path
Wooden Pavement
- 16. Multiple Choice
What is WBM Road Foot Path :-
Water Bound Macadam
Water Below Main Road
Water Between Main Road
Water Bounded by main road
- 17. Multiple Choice
ELECTRICAL CONDUITS should be laid :-
AFTER PLASTERING
AFTER PAINTING COMPLETED
DURING BRICK WORK
NONE
- Answer choicesTagsAnswer choicesTags