No student devices needed. Know more
20 questions
Capstan and turret lathes are usually used
To make small components
To make large components
For ordinary work
For mass production
Which of the following is not used as work holding device
The lathe that can accommodate maximum number of tools is
Engine lathe
Tool room lathe
Copy Lathe
Capstan and Turret lathe
Tail stock set over method of taper Turning is preferred for
Internal tapers
Small tapers
Long slender tapers
Step tapers
Half nut mechanism is employed while performing __________ operation in lathe
Under cutting
plain turning
Thread cutting
Taper turning
Which the following is lathe accessory for lathe
Head stock
Compound rest
Lathe carrier
Tool post
Enlarging an existing hole with a rotating single point tool is called
Boring
Drilling
Reaming
Internal turning
The lathe spindle is generally provided with a taper of
1:20
1:2000
1:200
1:2
Generally lathe tool is made of ______________ steel
Iron
Aluminum
Cast Iron
High Speed Steel
The lathe with 15 cm center height would have a swing over the bed as
30 cm
20 cm
50 cm
10 cm
Which operations are performed in lathe
Undercut
Threading
Facing
All of the above
Lathe bed is made of
Wood
Steels
Plastic
Cast Iron
The movement of the cutting tool in lathe is
Static
Moved
Not necessary
All of these
Most of the cases lathe is preferred to machining of
Square
Cylindrical
Rectangular
Any Shape
In lathe the tool post is arranged in _________side
Above
Below
Right side
Short work piece is hold in
Chuck
Tail Stock
Carriage
Lathe bed
Between center are used in lathe for ________Work
Cutting
Shaping
Holding
All of these
For capstan and turret lathes turret head is used or not.
Yes
No
Maybe
A & B
Steady Rest is also called
Head stroke
Centre Rest
Chuck
Tool Post
Lathe dogs are made up of
Wood
Plastics
Metal
Non of above.
Explore all questions with a free account