No student devices needed. Know more
34 questions
Which three settings and protocols can be used to provide secure and restrictive administrative access to FortiGate? (Choose three.)
HTTPS
SSH
Trusted host
Trusted authentication
FortiTelemetry
What is the purpose of the Policy Lookup feature?
It creates a new firewall policy based on input criteria.
It creates packet flow over FortiGate by sending real-time traffic
It finds duplicate objects in firewall policies.
It searches the matching policy based on input criteria.
Which two statements about incoming and outgoing interfaces in firewall policies are true? (Choose two.)
A zone can be chosen as the outgoing interface.
An incoming interface is mandatory in a firewall policy, but an outgoing interface is optional.
Multiple interfaces can be selected as incoming and outgoing interfaces.
Only the any interface can be chosen as an incoming interface.
Which statement about firewall policy NAT is true?
You must configure SNAT for each firewall policy.
SNAT can automatically apply to multiple firewall policies, based on SNAT policies.
DNAT is not supported.
DNAT can automatically apply to multiple firewall policies, based on DNAT rules.
An administrator has configured central DNAT and virtual IPs.
Which of the following can be selected in the firewall policy Destination field?
The mapped IP address object of the VIP object
A VIP object
A VIP group
An IP pool
FortiGate has been configured for Firewall Authentication. When attempting to access an external website, the user is not presented with a login prompt.
What is the most likely reason for this situation?
The user is using a super admin account.
No matching user account exists for this user.
The user was authenticated using passive authentication.
The user is using a guest account profile.
What does this raw log indicate? (Choose two.)
Select one or more:
Traffic originated from 13.32.69.150
FortiGate allowed the traffic to pass
10.0.1.10 is the IP address for *.cdn.mozilla.net
Traffic matches the application profile on firewall policy ID 1
View the exhibit. Which two behaviors result from this full (deep) SSL configuration? (Choose two.)
Select one or more:
A temporary untrusted FortiGate certificate replaces the server certificate when the server certificate is untrusted.
A temporary trusted FortiGate certificate replaces the server certificate when the server certificate is trusted.
A temporary trusted FortiGate certificate replaces the server certificate, even when the server certificate is untrusted.
The browser bypasses all certificate warnings and allows the connection.
Which two statements about blocking known Botnet Command and Control domains are true? (Choose two.)
This service requires a FortiGuard web filter and IPS license.
DNS lookups are checked against the Botnet Command and Control database.
You must manually download the Botnet Command and Control database and import it into FortiGate.
The Botnet Command and Control domains can be enabled in the Web Filter profile.
Which three actions are valid for static URL filtering? (Choose three.)
Warning
Block
Shape
Allow
Exempt
Which two statements about the application control profile mode are true? (Choose two.)
It cannot be used in conjunction with IPS scanning.
It can be selected in either flow-based or proxy-based firewall policy.
It can scan only unsecure protocols.
It uses flow-based scanning techniques, regardless of the inspection mode used.
Which two statements about FortiGate antivirus databases are true? (Choose two.)
The quick scan database is part of the normal database.
The extreme database is available only on certain FortiGate models.
The extended database is available only if grayware scanning is enabled.
The normal database is available on all FortiGate models.
Which two statements about antivirus scanning in a firewall policy set to proxy-based inspection mode are true? (Choose two.)
If a virus is detected, a block replacement message is displayed immediately.
A file does not need to be buffered completely before it is moved to the antivirus engine for scanning.
The client must wait for the antivirus scan to finish scanning before it receives the file.
FortiGate sends a reset packet to the client if antivirus reports the file as infected.
An administrator configured antivirus profile in a firewall policy set to flow-based inspection mode. While testing the configuration, the administrator noticed that eicar.com test files can be downloaded using HTTPS protocol only.
What is causing this issue?
Full-content inspection for HTTPS is disabled.
HTTPS protocol is not enabled under Inspected Protocols.
The test file is larger than the oversize limit.
Hardware acceleration is in use.
An administrator wants to monitor their network for any probing attempts aimed to exploit existing vulnerabilities in their servers.
What must they configure on their FortiGate to accomplish this? (Choose two.)
A DoS policy, and log all UDP and TCP scan attempts
A web application firewall profile to check protocol constraints
An IPS sensor to monitor all signatures applicable to the server
An application control profile and set all application signatures to monitor
Examine the exhibit, which shows a firewall policy configured with multiple security profiles. Which two security profiles will be handled by the IPS engine? (Choose two.)
Web Filter
IPS
AntiVirus
Application Control
An administrator needs to inspect all web traffic (including Internet web traffic) coming from users connecting to the SSL-VPN.
How can this be achieved?
Disabling split tunneling
Configuring web bookmarks
Using web-only mode
Assigning public IP addresses to SSL-VPN users
An administrator needs to create a tunnel mode SSL-VPN to access an internal web server from the Internet. The web server is connected to port1. The Internet is connected to port2. Both interfaces belong to the VDOM named Corporation.
What interface must be used as the source for the firewall policy that will allow this traffic?
port2
ssl.Corporation
ssl.root
port1
View the exhibit.
The settings are invalid. The administrator settings and the SSL-VPN settings cannot use the same port.
When a remote user accesses http://10.200.1.1:443, the SSL-VPN login page opens.
When a remote user accesses https://10.200.1.1:443, the FortiGate login page opens.
When a remote user accesses https://10.200.1.1:443, the SSL-VPN login page opens.
Which two statements correctly describe the differences between IPsec main mode and IPsec aggressive mode? (Choose two.)
Main mode cannot be used for dialup VPNs, while aggressive mode can.
Aggressive mode supports XAuth, while main mode does not.
The first packet of aggressive mode contains the peer ID, while the first packet of main mode does not.
Six packets are usually exchanged during main mode, while only three packets are exchanged during aggressive mode.
Examine the routing table and sniffer output in the exhibit.
Assuming telnet service is enabled for port1, which statement correctly describes why FGT1 is not responding to the SYN packets?
Select one:
The port1 interface does not have an IP address.
The port1 interface is administratively down.
The connection is denied because of forward policy check.
The connection is dropped because of reverse path forwarding check.
View the exhibit.
A user at 192.168.32.15 is trying to access the web server at 172.16.32.254. Which two statements best describe how the FortiGate will perform reverse path forwarding (RPF) checks on this traffic? (Choose two.)
Strict RPF check will deny the traffic.
Loose RPF check will deny the traffic.
Loose RPF check will allow the traffic.
Strict RPF check will allow the traffic.
Which two statements regarding the SD-WAN feature on FortiGate are true? (Choose two.)
Select one or more:
SD-WAN provides route failover protection, but cannot load-balance traffic.
FortiGate supports only one SD-WAN interface per VDOM.
Each member interface requires its own firewall policy to allow traffic.
An SD-WAN static route does not require a next-hop gateway IP address.
Which two configuration settings are global settings? (Choose two.)
Firewall policies
HA settings
User & Device settings
FortiGuard settings
Which two statements about advanced AD access mode for the FSSO collector agent are true? (Choose two.)
It uses the Windows convention for naming; that is, Domain\Username.
FortiGate can act as an LDAP client to configure the group filters.
It supports monitoring of nested groups.
It is only supported if DC agents are deployed.
Which statement about traffic flow in an active-active HA cluster is true?
Select one:
All FortiGate devices are assigned the same virtual MAC addresses for the HA heartbeat interfaces to redistribute to the sessions.
The secondary device responds to the primary device with a SYN/ACK, and then the primary device forwards the SYN/ACK to the client.
The ACK from the client is received on the physical MAC address of the primary device.
The SYN packet from the client always arrives at the primary device first.
Which statement about the HA override setting in FortiGate HA clusters is true?
Select one:
It is used to enable monitored ports.
It synchronizes device priority on all cluster members.
Configuring the HA override will reboot the FortiGate device.
You must configure override settings manually and separately for each cluster member.
Examine this FortiGate configuration:
config system global
set av-failopen pass
end
config ips global
set fail-open disable
end
Examine the output of the following debug command:
# diagnose hardware sysinfo conserve
memory conserve mode: on
total RAM: 3040 MB
memory used: 2706 MB 89% of total RAM
memory freeable: 334 MB 11% of total RAM
memory used + freeable threshold extreme: 2887 MB 95% of total RAM
memory used threshold red: 2675 MB 88% of total RAM
memory used threshold green: 2492 MB 82% of total RAM
Based on the diagnostic outputs above, how is the FortiGate handling packets that require IPS inspection?
They are allowed and inspected as long as no additional proxy-based inspection is required.
They are allowed and inspected as long as no additional proxy-based inspection is required.
They are allowed, but with no inspection.
They are dropped.
When does the FortiGate enter into fail-open session mode?
When memory usage goes above the red threshold.
When CPU usage goes above the red threshold.
When a proxy (for proxy-based inspection) runs out of connections.
When memory usage goes above the extreme threshold.
A FortiGate has multiple VDOMs operating in NAT mode with multiple VLAN interfaces in each VDOM. Which of the following statements is true regarding the IP addresses assigned to each VLAN interface?
A.Different VLANs can share the same IP address as long as they are in different physical interfaces.
A.Different VLANs can never share the same IP address on the same physical device.
Different VLANs can share the same IP address as long as they have different VLAN tag IDs
Different VLANs can share the same IP address as long as they are in different VDOMs
What combination of devices must participate in the Security Fabric?
A FortiMail and two or more FortiGate devices
A FortiAnalyzer and one or more FortiGate devices
A FortiAnalyzer, FortiGate devices, FortiSwitches and FortiAP
FortiGate devices, FortiSwitches and FortiAP
What are the two mandatory settings of the Security Fabric configuration?
Security Fabric Group name
FortiManager configured as Central Managament
FortiGate Telemetry
Feature "Security Fabric" enabled in Features Visibility
What solution, specific to Fortinet, enhances performance and reduces latency for specific features and traffic?
SDWAN
Acceleration hardware, called SPUs
Security Fabric
A.Increased RAM and CPU power
What traffic is always generated from the management VDOM?
FortiGuard
Link Health Monitor
SNTP
Syslog
Explore all questions with a free account