Have an account?
Skip to Content
Build your own quiz
Suggestions for you
40 questions
Show Answers
See Preview
- 1. Multiple Choice
What tool would you use to measure with?
Ruler
Steel Ruler
Rule
Steel Rule
- 2. Multiple Choice
What tool would you use to check a right angle on wood?
Try Square
Set Square
Square Peg
Protractor
- 3. Multiple Choice
What saw would you use to cut a straight line in wood with?
Tenon Saw
Coping Saw
Hack Saw
Junior Hack Saw
- 4. Multiple Choice
Name the two pieces of equipment you would use to hold your wood while sawing?
Vice and Tenon Saw
Bench Hook and Vice
Bench Hook and Tenon Saw
Tenon Saw and Bench
- 5. Multiple Choice
What tool would you use to tighten a nut and bolt to your wood?
Screw driver
Riveter
Spanner
Hammer
- 6. Multiple Choice
What machine would you use to drill holes in materials?
Hole Saw
Pillar Drill
Drill bit
Forstner bit
- 7. Multiple Choice
For the Pillar drill, which of these safety rules is false?
You must always wear goggles
One person in the box
You must always wear protective gloves
You must always use the hold the material securely
- 8. Multiple Choice
What Machine would you use to smooth the end of a piece of wood?
File/rasp
Plane
Sanding disc
Glass Paper
- 9. Multiple Choice
For the Sanding Disc, which of the following safety rules is false
You must keep your fingers behind the small circle
You must stay out of the black and yellow box if you are not using the machine
You must help your friend if they are confident but look like they are struggling
You must tie your hair back
- 10. Multiple Choice
Name the piece of equipment you used to cut an accurate, curved line into wood?
Hack Saw
Tenon saw
Panel Saw
Coping Saw
- 11. Multiple Choice
What abrasive material do you use to smooth wood?
Sand Paper
Glass Paper
Wet and Dry paper
Emery Cloth
- 12. Multiple Choice
Select two of the manufactured boards we could have used for our lazy tongs
MDF
Plywood
Chip board
Hardboard
- 13. Multiple Choice
Name the machine used to cut accurate, curved/zig zag lines in our manufactured board.
Band saw
Jig Saw
Mitre Saw
Scroll Saw
- 14. Multiple Choice
Name the most common softwood used in technology.
Pine
Spruce
Yew
Cedar
- 15. Multiple Choice
Name the type of Nut we used for our lazy tongs.
Nylon nut
Nylo nut
Nylock Nut
Nitro nut
- 16. Multiple Choice
Why would you use manufactured boards instead of a natural wood?
They are more expensive and therefore look nicer
They are stronger and more stable than natural woods
They are stronger than most metals
They have a special properties that mean you don't have to add varnish
- 17. Multiple Choice
What Does P.V.A. stand for
Poly Vinyl Adhesive
Poly Vinyl Acetate
Pony Vinyl Adhesive
Pony Vinyl Acetate
- 18. Multiple Choice
What do the initials C.A.D. stand for?
Computer Aided Design
Computer Aided Development
Computer Aimed Design
Computer Aimed Development
- 19. Multiple Choice
What do the initials C.A.M. stand for?
Computer Aided Manufacture
Computer Aimed Manufacture
Computer Allotted Manufacturer
Computer Aired Maker
- 20. Multiple Choice
What do the initials C.I.M. Stand for
Computer Internal Mind
Computer integrated Manufacture
Computer inner mind
Computer integrated Maker
- 21. Multiple Choice
What does parallel mean
When two lines never intersect
When a line meets at a corner
When a line creates a 30 degree angle
When a line makes a full circumference
- 22. Multiple Choice
What is Linear motion?
It is a one-dimensional motion along a straight line
A special case of Four Bar Chain in which the equal in lengths of opposite sides of the parallelogram ensure that input and output motions remain parallel.
A type of motion that repeats itself. An object swings about a fixed equilibrium position due to the presence of torque or restoring force.
It is a repetitive up-and-down or back-and-forth linear motion.
- 23. Multiple Choice
What is Reciprocating motion?
It is a one-dimensional motion along a straight line
A special case of Four Bar Chain in which the equal in lengths of opposite sides of the parallelogram ensure that input and output motions remain parallel.
A type of motion that repeats itself. An object swings about a fixed equilibrium position due to the presence of torque or restoring force.
It is a repetitive up-and-down or back-and-forth linear motion.
- 24. Multiple Choice
What is Oscillating motion?
It is a one-dimensional motion along a straight line
A special case of Four Bar Chain in which the equal in lengths of opposite sides of the parallelogram ensure that input and output motions remain parallel.
A type of motion that repeats itself. An object swings about a fixed equilibrium position due to the presence of torque or restoring force.
It is a repetitive up-and-down or back-and-forth linear motion.
- 25. Multiple Choice
What is parallel motion?
It is a one-dimensional motion along a straight line
A special case of Four Bar Chain in which the equal in lengths of opposite sides of the parallelogram ensure that input and output motions remain parallel.
A type of motion that repeats itself. An object swings about a fixed equilibrium position due to the presence of torque or restoring force.
It is a repetitive up-and-down or back-and-forth linear motion.
- 26. Multiple Choice
Name the part of the lazy tongs that creates parallel motion
Handles
Gripper head
Linkages
Nuts and bolts
- 27. Multiple Choice
How would you work out the cubic area of a piece of wood that has 3 measurements
- 28. Multiple Choice
Name the hard wood
Pine
Yew
Balsa
Cedar
- 29. Multiple Choice
Name the softwood
Beech
Iroko
Birch
Douglas Fir
- 30. Multiple Choice
What is a Ferrous metal
A metal that will not rust
A metal that contains Iron
A metal that is non-recyclable
A metal that is soft
- 31. Multiple Choice
What is a Non-Ferrous metal
A metal that will not rust
A metal that contains Iron
A metal that is non-recyclable
A metal that is soft
- 32. Multiple Choice
What is a Thermo-setting plastic
A plastic that will not shatter
A plastic that can be heated and reshaped
A plastic that does not create Micro plastics
A plastic that when heated and shaped, will not reshape when heated
- 33. Multiple Choice
What is a Thermo plastic
A plastic that will not shatter
A plastic that can be heated and reshaped
A plastic that does not create Micro plastics
A plastic that when heated and shaped, will not reshape when heated
- 34. Multiple Choice
Give an examples of a Thermo plastic
Epoxy Resin
Melamine formaldehyde
Polyester Resin
High Impact Poly Styrene (H.I.P.S.)
- 35. Multiple Choice
Give an examples of a Thermo-Setting plastic
Polyamide
Polystyrene
Urea Formaldehyde
Polyethylene
- 36. Multiple Choice
Select all the C.A.D programs
Google SketchUp
Microsoft Word
Adobe Photoshop
2D Design
- 37. Multiple Choice
Select all the C.A.M Machines
Laser cutter
3D Printer
Scroll Saw
Vinyl Cutter/ Plotter
- 38. Multiple Choice
Select the correct Piece of Personal Protective Equipment to protect your eyes
Gloves
Goggles
Apron
Dust Mask
- 39. Multiple Choice
Select the correct piece of Personal Protective Equipment to prevent splinters when moving timber
Gloves
Goggles
Apron
Dust Mask
- 40. Multiple Choice
Select the correct piece of Personal Protective Equipment to use when using spray paint
Gloves
Goggles
Apron
Dust Mask
- Answer choicesTagsAnswer choicesTags