Using the NFPA 70 NEC, Which Chapter and Article covers Cabinets?
110
250
312
500
2. Multiple Choice
2 minutes
1 pt
Using the NFPA 70 NEC, Which Chapter and Article covers Flexible wiring?
100
200
300
400
3. Multiple Choice
2 minutes
1 pt
What are Hazard Risk Categories used for?
To warn you of hazards.
To tell you how large a shock you might get from an electrical system.
To tell you the voltage level of an electrical system.
To select the correct PPE for a given task.
4. Multiple Choice
2 minutes
1 pt
What are steel earthing rods normally coated with?
Copper
Grease
Tin
Zinc
5. Multiple Choice
2 minutes
1 pt
What can be done to reduce corrosion of earth electrodes in the ground?
Using dissimilar metals
Adding water
Soil conditioning
Increasing ground temperature
6. Multiple Choice
2 minutes
1 pt
What can happen to equipment if the wrong power charger is used?
It will charge up quicker
It will charge up slower
It could damage the equipment
It will not charge
7. Multiple Choice
2 minutes
1 pt
What can reduce the effects of particulate erosion in a flow process?
Thinner pipe
Tighter bends
Reduced flow rate
Increased flow rate
8. Multiple Choice
2 minutes
1 pt
What can two dissimilar metals in an electrolyte can create?
Drops in air pressure
Rise in air pressure
An EMF
A Resistance
9. Multiple Choice
2 minutes
1 pt
What chapter in NEC discuss about communication systems?
Chapter-6
Chapter-7
Chapter-8
Chapter-9
10. Multiple Choice
2 minutes
1 pt
What communication method is appropriate to record a process change to a safety related inspection activity?
Verbal discussion
Mobile phone text
Social media update
Written instruction
11. Multiple Choice
2 minutes
1 pt
What des SAES stands for?
Saudi Aramco Engineering Standard
Saudi Arabian Engineering Standard
Saudi Authority for Electrical Supply
South East Electrical System
12. Multiple Choice
2 minutes
1 pt
What describes best the person or business that supplies products or services to your business?
Vendor
Purchaser
Seller
Contractor
13. Multiple Choice
2 minutes
1 pt
What describes new equipment testing that is witnessed at the vendor’s facility to demonstrate the design and manufacturing meets the original contract?
Site acceptance testing
Periodic condition testing
Facilities acceptance testing
Scheduled maintenance testing
14. Multiple Choice
2 minutes
1 pt
What describes the process approach best?
Plan Do Check Action
Cost cutting
HR training
Time keeping
15. Multiple Choice
2 minutes
1 pt
What device is used to convert DC in to AC?
Rectifier
Inverter
Transformer
Generator
16. Multiple Choice
2 minutes
1 pt
What do arc flash calculations identify?
Shock protection boundaries
Shock protection boundaries and PPE requirements
Shock protection boundaries and flash protection boundaries
Flash protection boundaries and incident energy
17. Multiple Choice
2 minutes
1 pt
What do the letters SPD stand for?
Surge Protection Device
Surge Panel Device
Solid Protective Device
Surge Protection Disconnection
18. Multiple Choice
2 minutes
1 pt
What document can be used as part of the quality assurance approach?
Design inspection checklist
Bill of quantity
Construction drawings
Floor plans
19. Multiple Choice
2 minutes
1 pt
What does IEC 60364 also contain?
Inspection purposes
Construction design
Design guidance
Law
20. Multiple Choice
2 minutes
1 pt
What does IEC mean?
International Electrotechnical Standards
International Electrical Standards
International Electrical and Electronics Standards
International Electrical and Technical Standards
21. Multiple Choice
2 minutes
1 pt
What does IEC stand for __________?
International electrotechnical commission
International electrical commission
International electrical Circuit
Installing Electrical Cable
22. Multiple Choice
2 minutes
1 pt
What does LEL stand for?
Lower Electricity Limit
Lower Electrons Limit
Lower Electrostatic Limit
Lower Explosion Limit
23. Multiple Choice
2 minutes
1 pt
What does NEC stand for?
National Electrical code
National Electronics Code
National Electrical Council
Newton’s Electrical Code
24. Multiple Choice
2 minutes
1 pt
What does NEMA stand for?
National Electrical Manufacturers Association
National Electronics Management Authority
National Elections Management Council
Never Energize Machine Accidently
25. Multiple Choice
2 minutes
1 pt
What does the cladding process sometimes use?
Laser
Cryogenic medium
Organic solvent
Ultrasonic bath
26. Multiple Choice
2 minutes
1 pt
What does UEL stand for?
Upper Explosion Limit
Upper Electricity Limit
Upper Explosion Line
Upper Electrons Limit
27. Multiple Choice
2 minutes
1 pt
What drawing shows major electrical items of the building?
Power riser diagram
Plot plan
Control Circuit diagram
Schedule
28. Multiple Choice
2 minutes
1 pt
What drawing shows power outlets?
Floor plan
Site plan
Power riser
Sectional drawing
29. Multiple Choice
2 minutes
1 pt
What focuses on areas for specific improvement and may address a particular corrective action or follow-up.
Development audit
Verification audit
Follow up audit
Quality audit
30. Multiple Choice
2 minutes
1 pt
What inspection can detect issues in Bearings?
Auditory inspection
Voltage checking
Overload inspection
Functional test
31. Multiple Choice
2 minutes
1 pt
What instrument do we use to measure the resistance of a cable?
Approved voltage indicator
Insulation resistance tester
Low resistance ohm-meter
Phase rotation meter
32. Multiple Choice
2 minutes
1 pt
What is a dedicated computer?
Task specific computer
Desktop computer
Laptop computer
Mainframe computer
33. Multiple Choice
2 minutes
1 pt
What is a disadvantage of using magnesium as an anode?
Poor mechanical properties
Poor electrical properties
Hydrogen embrittlement
Electrode potential too weak
34. Multiple Choice
2 minutes
1 pt
What is a hot stick?
A device for removing heat from electric circuits
A device for holding up electrical lines while being worked on
A device for providing physical separation from the device being operated
A device for measuring the voltage level of an electrical system.
35. Multiple Choice
2 minutes
1 pt
What is an example of an earth electrode?
Resistance rod
Driven rod
Copper shaft
Earth tab
36. Multiple Choice
2 minutes
1 pt
What is an example of an extreme transient voltage?
Converting DC to AC
Electronic circuitry
Switching on a light circuit
Lightning strike
37. Multiple Choice
2 minutes
1 pt
What is an example of working document?
Fire alarm manuals
Specification
ITPP
Test report
38. Multiple Choice
2 minutes
1 pt
What is an open arc flash?
It is an arc flash created by equipment in closed spaces.
It is an arc flash created in unconfined spaces.
It is created by an ejected arc.
It is created by a tracking arc.
39. Multiple Choice
2 minutes
1 pt
What is another method of electrically bonding lengths of pipeline together apart from welding?
Gluing
Bolting
Wedging
Taping
40. Multiple Choice
2 minutes
1 pt
What is arc flash energy also called?
Noise energy
Incident energy
W Cal/cm2
Sound energy
41. Multiple Choice
2 minutes
1 pt
What is best document to explain the supplier about what you need?
Specification sheet
ITP
Dispatch note
Delivery note
42. Multiple Choice
2 minutes
1 pt
What is defined as a location of increased risk of shock?
A room with more than two sockets
An outside space
A room containing a bath
A room protected by an RCD
43. Multiple Choice
2 minutes
1 pt
What is defined as the general nature (or properties) of the hazardous material in the surrounding atmosphere which may, or may not, be in enough quantities?
Group
Class
Division
Zone
44. Multiple Choice
2 minutes
1 pt
What is defined as the type of hazardous material in the surrounding atmosphere?
Class
Group
Zone
Division
45. Multiple Choice
2 minutes
1 pt
What is fitted to an ACSR cable to increase the mechanical tension that can be applied?