Have an account?
Skip to Content
Build your own quiz
Suggestions for you
51 questions
Show Answers
See Preview
- 1. Open EndedNIOSH is an acronym for which if the following?
- 2. Open EndedOSHA's Focus Four training topics include caught-in or -between, struck-by, electrocution, and:
- 3. Open EndedIn most elevated work locations, at what height does OSHA generally require fall protection on a construction site?
- 4. Fill in the BlankA fall hazard is anything that could cause you to _______, which may result in a fall.
- 5. Open EndedWhich of the following is an OSHA requirement, regardless of the fall distance?
- 6. Open EndedExamples of falls that have resulted in deaths on the jobsite include:
- 7. Fill in the BlankA job hazard analysis (JHA) of roofing activities should be conducted prior to starting work to systematically identify, evaluate, and _______ all hazards.
- 8. Open EndedWhich of the following can be used to prevent complacency from happening to use or to those around you?
- 9. Open Endedaccording to statistics year after year, which of the following would be considered a significant fall hazard in construction?
- 10. Open EndedWhich of the following is a basic element of a roof fall protection program?
- 11. Open EndedStudies have shown that complacency, a hazardous behavior, may be caused by which of the following?
- 12. Open EndedTraining topics for employees who are exposed to fall hazards should include:
- 13. Open EndedAccording to statistics year after year, which of the following would be considered a significant fall hazard in construction?
- 14. Fill in the BlankA(n) _________ system is used in construction to restrict access to a roof to only authorized employees
- 15. Open EndedScaffold failures are often caused by which of the following?
- 16. Fill in the Blank________ must be safely cleared from a scaffold as soon as possible to eliminate slippery conditions
- 17. Open EndedWhich of the following is a frequently cited OSHA violation of safe ladder use?
- 18. Fill in the BlankOSHA requires fall protection when working near the edge of a trench or an excavation that is _______ or more in depth.
- 19. Open EndedYou are at a higher risk for falling if your portable ladder is:
- 20. Fill in the BlankAccording to OSHA, a fall hazard exists whenever workers who load and unload trucks must climb onto trailers, materials, or equipment and their feet are above _______ from the lower level or ground
- 21. Open EndedPersonal fall arrest snap-hooks must be locking and be:
- 22. Open EndedFall restraint systems must meet which of the following criteria?
- 23. Fill in the Blank3 major components of a personal fall arrest system: anchor and the anchorage connector, full body harness, and ______
- 24. Open EndedBody belts are allowed for:
- 25. Open EndedPersonal all arrest system connectors (e.g., D-rings and snap-hooks) must be compatible and capable of supporting at least:
- 26. Fill in the BlankHorizontal lifelines shall be designed, installed, and used under the supervision of a(n) _______ as part of a complete personal fall arrest system, which maintains a safety factor of at least two.
- 27. Open EndedWhich of the following is an engineering control that is installed to mitigate fall hazards?
- 28. Fill in the BlankIf there are any defects found during the inspection of personal fall protection equipment, or it the equipment has been used in an arrest, it must be _________.
- 29. Open EndedProtect yourself when working on a ladder by:
- 30. Open EndedIt is important to secure your ladder, whenever feasible, to:
- 31. Open EndedThe three main types of portable ladders are:
- 32. Open EndedThe 4:1 angle rule for extension ladders means which of the following?
- 33. Open EndedAlways select a ladder that:
- 34. Open EndedOSHA and ladder manufacturers require which of the following when ascending or descending?
- 35. Open EndedSupported scaffold systems must be inspected for:
- 36. Fill in the BlankA __________ must be available to direct workers who are constructing or moving scaffolds
- 37. Open EndedWhen using scaffolds, make sure there it:
- 38. Fill in the BlankEvery supported scaffold and its components must support, without failure, its own weight and at least _________ the intended load.
- 39. Open EndedPlanks that are 12 feet long on a supported scaffold must extend beyond supports:
- 40. Open EndedWhen is climbing on the cross braces of a scaffold allowed?
- 41. Fill in the BlankOSHA specifically requires ______ to assess the workplace to determine if the walking/working surfaces on which you work have the strength and structural integrity to safety support workers.
- 42. Open EndedWith respect to anchorage points, employers must:
- 43. Open EndedEmployees must not work on scaffold surfaces until:
- 44. Open EndedScaffold user training must include
- 45. Open Ended"A person who must select and direct employees who erect, dismantle, move, or alter scaffolds and who must inspect scaffolding to ensure compliance" is called a:
- 46. Fill in the BlankA ______ is any mechanism, (rope grab, rip-stitch lanyard, tearing or deforming lanyards) used to dissipate a substantial amount of energy during a fall arrest, or otherwise limits the energy imposed on an employee during fall arrest.
- 47. Open EndedHow many workers can work off one lanyard?
- 48. Open EndedWhich is true about retractable lanyards:
- 49. Open EndedRetractable Lanyards are the often the first choice for a fall protection lanyard. Why?
- 50. Open EndedA hazard is a situation or condition that has the potential to cause harm to which of the following?
- 51. Fill in the BlankA guardrail system or a personal fall arrest system is required or scaffolds more than _______ above a lower level.
- Answer choicesTagsAnswer choicesTags