Fayed surfaces cause concern in chemical cleaning because of the danger of?
2. Open Ended
30 seconds
1 pt
Caustic cleaning products used on aluminum structures have the effect of producing?
3. Open Ended
30 seconds
1 pt
Fretting corrosion is most likely to occur?
4. Open Ended
30 seconds
1 pt
the rust or corrosion that occurs with most metals is the result of?
5. Open Ended
30 seconds
1 pt
Which of the following are the desired effects of using Alodine on aluminum alloy?
6. Open Ended
30 seconds
1 pt
Which of the listed conditions is Not one of the requirements for corrosion to occur?
7. Open Ended
30 seconds
1 pt
The lifting or flaking of the metal at the surface due to delamination of grain boundaries caused by the pressure of corrosion residual product buildup is called?
8. Open Ended
30 seconds
1 pt
A nonelectrolytic chemical treatment for aluminum alloys to increase corrosion resistance and paint-bonding qualities is called?
9. Open Ended
30 seconds
1 pt
Which of the following are acceptable to use in cleaning anodized surfaces?
10. Open Ended
30 seconds
1 pt
Intergranular corrosion in aluminum alloy parts?
11. Open Ended
30 seconds
1 pt
Which of the following may not be detectable even be careful visual inspection of the surface of aluminum alloy parts or structures?
12. Open Ended
30 seconds
1 pt
What may be used to remove corrosion from highly stressed steel surfaces?
13. Open Ended
30 seconds
1 pt
A primary cause of intergranular corrosion is?
14. Open Ended
30 seconds
1 pt
Corrosion should be removed from magnesium parts with?
15. Open Ended
30 seconds
1 pt
Why is it important not to rotate the crankshaft after the corrosion preventative mixture has been put into the cylinders on engines prepared for storage?
16. Open Ended
30 seconds
1 pt
Which of the following is an acceptable first step procedure to help prevent scratching when cleaning a transparent plastic surface?
17. Open Ended
30 seconds
1 pt
What should be done to prevent rapid deterioration when oil or grease come in contact with a tire?
18. Open Ended
30 seconds
1 pt
Galvanic corrosion is likely to be most rapid and severe when?
19. Open Ended
30 seconds
1 pt
Corrosion caused by galvanic action is the result of?
20. Open Ended
30 seconds
1 pt
Which of these materials is the most anodic?
21. Open Ended
30 seconds
1 pt
The interior surface of sealed structural steel tubing would be best protected against corrosion by which of the following?
22. Open Ended
30 seconds
1 pt
Which of these materials is the most cathodic?
23. Open Ended
30 seconds
1 pt
Of the following, when and/or where is galvanic corrosion is most likely to occur?
24. Open Ended
30 seconds
1 pt
One way of obtaining increased resistance to stress corrosion cracking is by?
25. Open Ended
30 seconds
1 pt
(1) In the corrosion process, it is the cathodic area or dissimilar cathodic material that corrodes.
(2) In the Galvanic or Electro-Chemical Series for metals, the most anodic metals are those that will give up electrons most easily.