No student devices needed. Know more
10 questions
What is the objective of the economic dispatch problem?
The objective of economic dispatch problem is to maintain the operating cost of active power generation.
The objective of economic dispatch problem is to maximize the operating cost of active power generation.
The objective of economic dispatch problem is to reduce the operating cost of active power generation.
The objective of economic dispatch problem is to minimize the operating cost of active power generation.
Economic distribution of loads between plants also know as _____________.
unit commitment
Coordination equation
economic dispatch
Lagrange’s method
The rate of change of fuel cost with active power generation is called______________________.
incremental fuel-cost
incremental rate
participation rate
base point
Choose the statement or statements that describes the following case: "For economic dispatch that neglecting on both line losses and generation limit"
it is the most complicated economic dispatch problem.
total generation is equal to the total demand.
all the generator will share the load equally.
when losses are neglected with no generator limits, for optimal dispatch all plants must operate at equal incremental fuel-cost.
None of the above
For economic dispatch that neglecting line losses but including generation limits, what should be done if the power is outside the limit of a generator?
The generator shall stop supplying immediately.
The generator will remain as the participating generator in the optimization of dispatched power.
The generator should be set to the limit, either at the minimum or maximum power
The generator is no longer a participating generator in the optimization of dispatched power
The generator should always running at its rated power.
C1(P1)=0.01P12+30P1+10; 100MW≤P1≤150MW C2(P2)=0.05P22+10P2+10; 100MW≤P2≤180MW
Consider the economic dispatch problem for a power plant having two
generating units. The fuel costs in RM/MWh along with the generation
limits for two units are given above.
The incremental cost (in RM/MWh) of the power plant when it
supplies 200MW is _______.
20
22
21
24
The incremental cost (in RM/Mwh) of operating two
generating units are functions of their respective power P1 and P2 in MW and give by
dP1dC1=0.2P1+50
dP2dC2=0.24P1+40
Where
20MW ≤ P1 ≤ 150MW
20MW≤ P2 ≤150MW
For a certain demand, P1
and P2 have been chosen such that and .
If the generations are rescheduled to minimize the total cost, then P2
is_______.
135MW
126.24MW
144MW
136.36MW
State the factors influencing the minimum cost of power generation
operating efficiency of prime mover and generator
fuel costs
transmission losses
PQ and PV bus
None of the above
State the methods to determine the economic dispatch
Lamda-Iteration Method
La Grange Multiplier method
Fast-Decoupled method
Newton Raphson Method
What is the unit output of incremental cost?
RM/MWh
RM/MW
RM
MWh
Explore all questions with a free account