No student devices needed. Know more
20 questions
When is the use of utility rope appropriate?
A. When the total load is less than 750 lb (340 kg)
B. For static loads only
C. When the rope will not be supporting people
D. In situations where the rope will likely be damaged
a
b
c
d
Natural fiber ropes are created using which type of construction?
A. Twisted
B. Braid-on-braid
C. Kernmantle
D. Plaited
A
B
C
D
Which is a common cause of deterioration in natural fiber ropes?
A. Storage in a low-humidity environment
B. Mildew
C. Storage in a rope bag
D. Infrequent use
A
B
C
D
Compared to a natural fiber rope, a synthetic fiber rope:
A. has a smaller diameter than a natural fiber rope of equal strength.
B. is weakened to a lesser degree by knots.
C. is more susceptible to heat damage
.
D. is less susceptible to damage from acid or alkali exposure.
A
B
C
D
Which is a common synthetic fiber used for life safety ropes?
A. Polyester
B. Rayon
C. Monoester
D. Polypropylene
A
B
C
D
For which application is dynamic rope especially well suited?
A. Rescue
B. Mountain climbing
C. Hoisting
D. Static loads
A
B
C
D
Which method of construction is required for life safety rope?
A. Plaited
B. Woven
C. Block creel
D. Solid braid
A
B
C
D
Which knot is used only in conjunction with other knots?
A. Half hitch
B. Water
C. Clove hitch
D. Figure eight bend
A
B
C
D
Which is the preferred type of rope for fire department life safety use?
A. Dynamic
B. Resilient
C. Static
D. Tractable
A
B
C
D
Ropes should be cleaned with:
A. a mild bleach solution.
B. castile soap.
C. mild detergent.
D. water only.
A
B
C
D
The term for a rope that is suddenly put under unusual tension is __________ loading.
A. impact
B. drop
C. tensile
D. shock
A
B
C
D
Knots that wrap around an object, such as a pike pole, are:
A. hitches.
B. bends.
C. bights.
D. loops.
A
B
C
D
Which part of a rope is used for hoisting?
A. Running end
B. Working end
C. Standing part
D. Free end
A
B
C
D
Which part of a rope is used for hoisting?
A. Running end
B. Working end
C. Standing part
D. Free end
A
B
C
D
What is formed by reversing the direction of a rope to form a “U” bend with two parallel ends?
A. Loop
B. Bend
C. Round turn
D. Bight
A
B
C
D
Which is formed by making a loop in a rope and then bringing the two ends of the rope parallel to each other?
A. Eye
B. Cinch
C. Round turn
D. Bend
A
B
C
D
A rope is attached to a ladder for hoisting using a(n):
A. clove hitch.
B. bowline.
C. figure eight on a bight
.
D. overhand safety.
A
B
C
D
Which knot is used to keep the hoisting rope aligned with the handle of a tool being hoisted?
A. Half sheepshank
B. Directional figure eight
C. Half hitch
D. Overhand
A
B
C
D
Which knot would typically be used to attach a rope to a tree or pole?
A. Square knot
B. Bowline on a bight
C. Figure eight on a bight
D. Clove hitch
A
B
C
D
Which knot component is part of a clove hitch?
A. Round turn
B. Loop
C. Follow-though
D. Bight
A
B
C
D
Explore all questions with a free account