30 questions
When disassembling a computer, its okay to stack circuit boards on top of each other as long as you follow ESD protection rules.
True
False
Immediately after you unplug the computer from the power outlet, you're safe to begin working inside the case.
True
False
The motherboard sits on elevated screw holes or spacers to keep it from touching the case.
True
False
Some boards designed to support multiple PCIe video cards will have additional power connectors on the board to power wattage-hungry cards.
True
False
Which statement is NOT a good practice when working inside a computer case?
be sure to hold expansion cards by the edge connectors
remove loose jewelry
don't touch a microchip with a magnetized screwdriver
don't touch the inside of a computer that is turned on
What is the second step in opening the case of a working computer?
press and hold down the power button for a moment
back up important data
Power down the system and unplug it
open the case cover
What do you call a connector on a motherboard that consists of pins that stick up from the board?
jumper
socket
pin array
header
What are the round plastic or metal pegs that separate the motherboard from the bottom of the case known as?
header
standoff
insulator
elevator
In what order should you install components into the case after disassembling a computer?
power supply, drives, motherboard, cards
drives, motherboard, cards, power supply
cards, motherboard, power supply, drives
motherboard, drives, cards, power supply
What type of connector is not typically found on the front panel header?
Power SW
HDD LED
SATA controller
Power LED+
What does a small triangle embedded on a connector signify?
use caution when suing the connector
the wire nearest the triangle is pin 1
the pin near the triangle should be matched with a circular pin
the connector is optional and need to be attached
Where should you clip your ESD strap when opening a computer case?
power supply
computer case
electrical outlet
the floor
Which component may be considered a field replaceable unit (FRU)?
LCD screen
power supply
hard drive
All of the above
A system will always require what power connector?
4-pin auxiliary
6-pin PCIe power connector
P1 power connector
8-pin PCIe power connector
When handling motherboards, cards, or drives, which statement is NOT accurate?
You should not touch chips on the device
You should not hold expansion cards by the edges
You should not touch any soldered components on a card
you should not touch edge connectors
What is the very first step that should be taken when performing work with a computer?
You should back up any important data
You should ground yourself
The components should be removed
You should power down the system and unplug it
What are 3 tips you should keep in mind before beginning work inside a computer case?
What is the first step you should perform before working inside the case of a working computer?
Why are motherboards installed in the case using spacers?