Have an account?
Skip to Content
Build your own quiz
Suggestions for you
Other
12th
grade
M9 &10 T2 Introduction to G & M codes
12 questions
Show Answers
See Preview
- 1. Multiple ChoiceG54Work CoordinateCutter Compensation leftIncremental ProgrammingMachine Home
- 2. Multiple ChoiceM06Program StopTool ChangeSpindle on CWProgram End
- 3. Multiple ChoiceM30Machine HomeSpindle StopCoolant onProgram end
- 4. Multiple ChoiceCode that has the bed travel in a straight line feed ( cut in a straight line)G01G02G03G00
- 5. Multiple ChoiceSelect the desired tool for machiningG01G00ST
- 6. Multiple ChoiceCode that sets the feed rate or rate of travel of the tableSFG-codeM-code
- 7. Multiple ChoiceCode that sets the program units to be in inchesG20G21G00G03
- 8. Multiple ChoiceCode that sets the program units to be in metricG20G21G00G03
- 9. Multiple ChoiceCode that rapidly moves the cutting tool above the surface of the materialG01G00G03G02
- 10. Multiple ChoiceCode that sets the distance mode which will always be set to X0 and Y0G01G00G90G91
- 11. Multiple ChoiceCode that sets the distance mode so that current position is a the new zeroG01G00G90G91
- 12. Multiple ChoiceG91Absolute ProgrammingIncremental ProgrammingTapping Canned CycleTool Length Compensation
- Answer choicesTagsAnswer choicesTags