No student devices needed. Know more
30 questions
What is the correct boot process order?
1.OS Initializing itself
2.Loading the OS
3.BIOS checking hardware (POST)
4.Load the Shell/GUI (DOS Prompt)
1,2,3,4
2,3,4,1
3,2,1,4
3,1,2,4
What do you press on the HP computer keyboard in order to open the BIOS screen?
F6
Esc
F2
Tab
Basic Input/Output System (BIOS) job is to perform initial hardware checks when the computer is turned on and start the operating system.
True
False
Select the two places specific parameters of a new device are stored after replacing a modular hardware component inside computer case.
System BIOS
CMOS
Startup BIOS
Secondary storage
Once the initial diagnostics are performed and assigning system resources, the startup BIOS program will check for information about secondary storage devices that might contain the OS. This list of devices and the order in which they should be checked are found and arranged in the CMOS setup utility, and are commonly referred to as:
The Boot Record
The Boot sequence
The MBR (Master Boot Record)
The Disk Partition table
When launching Windows Virtual PC application a technician receives an error message that the Hardware-Assisted Virtualization (HAV) feature is not enabled on the computer. Which steps might help to fix the problem?
Safe mode troubleshooting
Re-install the Windows Virtual PC application
Get into the CMOS setup utility and enable the virtualization technology setting
Increase the amount of physical RAM on the system
What is MBR acronym stand for
Master Boot Record
Main Boot Record
Main Batch Record
Main Bad Record
Where is the MBR located on the HDD
On the first sector in the HDD
Anywhere on the HDD
On the RAM of the HDD
On the ROM of the HDD
What does the MBR contain?
Boot Loader
BIOS
Device Setting
OS
Check all Hardware in the following options
HDD
ROM
RAM
Boot Loader
BIOS
Explore all questions with a free account