Have an account?
Skip to Content
Build your own quiz
Suggestions for you
Professional Development
University
EEE610 INDIVIDUAL ASSIGNMENT 1 FOR GROUP EE2427AB
40 questions
Show Answers
See Preview
- 1. Multiple Choice
Identify the correct sequence in order to gain the status of Tier 1 Professional Engineer.
i. Complete your engineering degree.
ii. Register as a graduate engineer with BEM.
iii. Register as graduate member with IEM.
iv. Complete three years of professional experience.
v. Pass the professional interview.
i, ii, iii and iv.
i, iii, iv and v.
all above.
i, ii, iv and v.
- 2. Multiple Choice
Which of the following statements about the Health and Safety at Work Act 1974 is incorrect?
Employers are under a duty to act reasonably when managing health and safety matters.
Employers are under an obligation to carry out formal risk assessments.
Employers should not take account of the costs of reducing risks when health and safety risks are identified.
Employers must maintain written policy statements on health and safety matters.
- 3. Multiple Choice
The statement of “A registered engineer shall at all times hold paramount the safety, health and welfare of the public” is referring to:
i. The status of work completion can only be certified if the registered engineer has supervised the work.
ii. Any violation of code should be reported to the professional bodies or public authorities.
iii. Notify the authorities or employer when his advice may endanger life and property.
iv. Reveal facts or information without prior consent for the safety of the public.
i, ii, iii.
ii, iii, iv.
i, iii, iv.
i, ii, iv.
- 4. Multiple Choice
An Material Safety Data Sheet (MSDS) may NOT contain information about:
what the hazardous substance should be used for.
first aid instructions.
the health effects of the hazardous substance.
the requirement for health surveillance.
- 5. Multiple Choice
An engineer should
i. be meticulous and correct in certification work.
ii. delay inspection of work.
iii. respond to complaint.
iv. offer his opinion on engineering matters.
i and iii.
ii and iii.
i and iv.
i and ii
- 6. Multiple Choice
Hazardous substances are:
only chemicals and other substances which can cause injury, illness or disease.
only those that are on the NOHSC list of designated hazardous substances, or that meet the NOHSC approved criteria for classifying hazardous substances.
only those that have set exposure standards.
only those that cause chronic health effects.
- 7. Multiple Choice
A foreign Engineer who seeks registration in Malaysia must
register with IEM and BEM only.
register with IEM only.
register with BEM and governed by the Engineers Act 1967.
governed by the Engineers Act 1967.
- 8. Multiple Choice
The main steps of the risk management process are:
identifying hazards, assessing and controlling risks, monitoring and reviewing control measures.
consultation, training and information management.
workplace inspections, checklists, records and information
monitoring hazardous levels, health surveillance, training and recording.
- 9. Multiple Choice
An engineer with practicing certificate is
i. a professional Engineers with the title “Ir.”.
ii. a tier 2 registration.
iii. a qualified engineer.
iv. using hexagon stamp.
i,ii and iii.
i,ii and iv.
i,iii and iv.
ii,iii and iv.
- 10. Multiple Choice
Workplace health and safety legislation imposes a duty of care on;
the employer.
the employee.
all participants in the workplace.
visitors to the workplace.
- 11. Multiple Choice
In order to be entitled for professional engineer, the applicant shall
at the time of application for professional engineer has reside more than 3 months in Malaysia.
at the time of application for professional engineer has reside less than 6 months in Malaysia.
at the time of application for professional engineer has reside more than 6 months in Malaysia.
at the time of application for professional engineer has reside more than 12 months in Malaysia.
- 12. Multiple Choice
All of the following are considered as first aid except:
Performing CPR.
Applying direct pressure to stop blood flow.
Applying ointments to the burn.
Applying stitches to the wound.
- 13. Multiple Choice
Under the Registration of Engineers Act 1967, the Don’ts below relate to the requirement of this Act:
An engineer should report unethical practice to BEM.
An engineer should make optimum use of manpower, materials and money.
An engineer should not supplant another engineer.
An engineer should undertake continuing professional development to enhance his knowledge and capability.
- 14. Multiple Choice
Which of the following is part of the safety and health committee for a company with more than 100 workers?
i. Chair.
ii. Treasurer.
iii. Secretary.
iv. 2 representatives from employer.
v. 4 representatives from employees.
i, iii and v.
i, ii, iii and iv.
i, ii, iii, iv and v.
i, iii and iv.
- 15. Multiple Choice
Engineering is often characterized as having four main branches. Choose the correct answer.
Chemical Engineering, Civil Engineering, Electrical Engineering and Medical Engineering.
Electrical Power Engineering, Electronic Engineering, Electrical System Engineering and Electrical Computer Engineering.
Chemical Engineering, Civil Engineering, Electrical Engineering and Mechanical Engineering.
Electrical Engineering, Naval Engineering, Aerospace Engineering and Manufacturing Engineering.
- 16. Multiple Choice
What does the picture shown represent?
Red Cross.
Maltese.
Star of life.
ISO First Aid.
- 17. Multiple Choice
1. Professional Assessment Examination (PAE) is conducted by
i. Institution of Engineers Malaysia (IEM).
ii. Board of Engineers Malaysia (BEM).
iii. Malaysian Society for Engineering & Technology (MySET).
iv. Engineering Accreditation Council (EAC).
Choose the correct combination.
i and ii.
ii and iii.
i and iii.
All the above
- 18. Multiple Choice
What is CPR stands for?
Cardiopulmonary Resuscitation.
Chest Program Compression.
Chest Pain Resuscitation.
Cardiac Arrest.
- 19. Multiple Choice
All below is an employer’s obligation to protect their worker EXCEPT
A proper system of work and effective supervision.
Reasonable care must be taken to expose employees to danger.
A competent staff of employees for safety.
Adequate safety material.
- 20. Multiple Choice
In consultancy, an engineer _____ whatsoever in connection with the work he is undertaking unless prior approval from BEM and client are obtained.
should have conflict of interest.
should not have any conflict of interest.
should create conflict of interest.
must have any conflict of interest.
- 21. Multiple Choice
Is an engineer allowed to practice in the branch of engineering he/she is not registered in?
Yes.
No.
Maybe.
Depends on the situation.
- 22. Multiple Choice
What does Ir. stand for?
Engineur.
Insenieur.
Ingenieur.
Technologist.
- 23. Multiple Choice
“An unplanned event that did not result in injury, illness, or damage - but had the potential to do so” is best to describe?
Safety.
Sickness.
Near miss.
Accident.
- 24. Multiple Choice
Employer’s responsibilities are required to provide ____________ equipment, facilities and personnel to ensure their employees receive immediate attention if they are injured or taken ill at work.
adequate.
appropriate.
adequate and appropriate.
complete.
- 25. Multiple Choice
The Engineering Profession in Malaysia is regulated by which Act?
Engineers Act 1957.
Engineers Act 1967.
Engineers Act 1965.
Engineers Act 2019.
- 26. Multiple Choice
What is the minimum working experience duration requiring for graduate member to convert to professional member?
1 year.
2 years.
3 years.
4 years.
- 27. Multiple Choice
What is the meaning of Ingenieur?
Respectful.
To contrive and cleverness.
Problem Solver.
Responsible.
- 28. Multiple Choice
The duties of employers in Occupational Safety and Health Act 1994 (Act 514) are:
To ensure the health, safety of the workforce.
To ensure the health, safety and welfare of the workforce.
To ensure the health, safety, welfare and money of the workforce.
To ensure the health, safety and welfare of the workforce family.
- 29. Multiple Choice
1. Occupational Safety and Health Act 1994 (Act 514) requires all companies to establish and document
i. Safety and health policy.
ii. Duties of the employer, employees and the safety and health officers.
iii. The safety and health committee of companies.
iv. Occupational safety and health inspections and officers.
Choose the correct combination.
i, ii and iii.
ii, iii and iv.
i, iii and iv.
All the above.
- 30. Multiple Choice
What are OSHA stands for?
Occupational Safety and Health Agency.
Organization of Safety and Health Agency.
Occupational Safety and Health Act.
Organization of Safety and Health Act.
- 31. Multiple Choice
Which of the following best describe of Civil Engineering?
The design, study and manufacture of various electrical and electronic systems, such as Broadcast engineering, electrical circuits and generators.
The design and manufacture of physical or mechanical systems such as power and energy systems, aerospace/aircraft products and weapon.
The design and construction of public and private works such as infrastructure, bridges, tunnels, dams and buildings.
The application of physics, chemistry, biology and engineering principles in order to carry out chemical processes on a commercial scale.
- 32. Multiple Choice
Engineering is the creative applications of _______________ to the innovation, design, construction, operation and maintenance of structures, machines, materials, devices, systems, processes, and organizations.
science and mathematics
science, mathematics and statistics
science, mathematics and analytical evidence
science, mathematics and empirical evidence
- 33. Multiple Choice
A fresh graduate with an unaccredited engineering degree can be registered with the Board of Engineers (BEM) upon:
passing the BEM entrance test.
passing the IEM entrance test.
completing 3 years of working experience.
furthering and completing studies in a Master taught course.
- 34. Multiple Choice
1. The frequency of meeting to be conducted by the safety and health committee is:
i. Once in 3 months for a low risk workplace.
ii. Once a month for a high-risk workplace.
iii. Twice a month for a high-risk workplace.
iv. Once a month for a low risk workplace.
i,ii,iii.
i,ii,iv.
i,iii,iv.
ii,iii,iv.
- 35. Multiple Choice
1. What is the role of employer to the safety and health committee?
i. Provide adequate training.
ii. Ensure that the member of committee have basic understanding of the function of the committee under the Act.
iii. Disseminate information which would be prejudicial to the interest of the National security.
iv. To make available relevant document.
i,ii and iii.
i,ii and iv.
i,iii and iv.
ii,iii and iv.
- 36. Multiple Choice
1. State the importance of the safety and health committee.
i. To develop knowledge of the workers on safety and health.
ii. Conduct inspection at the work place to ascertain if there is anything prejudicial to the safety and health of persons employed therein.
iii. Collaboration between workers and management on safety and health.
iv. Play active role in workplace safety and health.
i,ii and iii.
i,iii and iv.
i,ii and iv.
ii,iii and iv.
- 37. Multiple Choice
A fresh graduate with an accredited engineering degree should register with the Board of Engineers. This registration carries the title:
Graduate engineer.
Junior engineer.
Young engineer.
Graduate member.
- 38. Multiple Choice
1. In the Registration of Engineers Act 1967 (revised 2002); provision is included for the registration of:
i. Accredited Checkers.
ii. Continuing Professional Development.
iii. Accredited Auditors.
iv. Continuing Professional Assessment.
i and ii.
i, ii and iii.
ii and iv.
All the above.
- 39. Multiple Choice
State the minimum quorum in order for the safety and health committee to conduct a meeting.
A chairman and not less than half of the remaining members.
A secretary, a chairman and quarter of the remaining members.
A secretary and not less than half of the remaining members.
A secretary, a chairman and a representative from the employer.
- 40. Multiple Choice
1. In the Registration of Engineers Act 1967 (revised 2002); provision is included for the registration of:
i. Accredited Checkers.
ii. Continuing Professional Development.
iii. Accredited Auditors.
iv. Continuing Professional Assessment.
i and ii.
i, ii and iii.
ii and iv.
All the above.
- Answer choicesTagsAnswer choicesTags