No student devices needed. Know more
20 questions
When was the OSH act passed
1940
1950
1970
1980
In which part of the C.F.R. are the OSHA Construction Standards found?
1910 and 1940
1917 and 1926
1940 and 1970
1926 and 1910
What type of OSHA inspection is conducted when immediate death or serious harm is likely?
Complaint
Programmed
Imminent Danger
Referral
Name four hazards that are relevant to a focused inspection?
Falls, Struck Bys. Electrocution, Caught in Between
Falls, Compliance, Electrocution, Struck Bys
Compliance, Electrocution, Struck Bys, Caught in Between
Falls, Compliance, Caught in Between, Electrocution
Thirty-six times a workers' weight is the approximate impact force of a worker falling how far?
Ten feet
Six feet
Twelve feet
One foot
Each employee who is constructing a leading edge 6 feet above a lower level shall be protected from falling by use of these:
Guardrails
Safety harness/Personal fall arrest
Safety nets/ hole covers
All of the above
Which of the following is the leading cause of on the job deaths in the construction industry?
Electrocution
Falls
Cancer
Struck Bys
Check extension cords at the beginning of each week for damage.
True
False
A ___________ person has the authorization of the employer to take prompt corrective measures to eliminate hazards.
Qualified
Certified
Competent
Union
To be acceptable, most PPE must meet the standards set by:
OSHA
ANSI
ASME
ASTM
Private sector workers in Illinois are covered under which plan?
Federal OSHA
Illinois State Plan
Midwest OSHA
Local Union's Acceptable Practice for Construction Industry
Which type of respirator filters the air that you inhale?
Suppiled Air
S.C.B.A.
Air Purifying
S.C,U,B.A.
List the three elements that a fire needs to burn.
Fuel, Oxygen, Heat
Fuel, Oxygen, Water
Oxygen, Heat, Water
Fuel, Heat, Water
Lean an extension ladder at about a ___ degree angle for safe usage.
30
45
75
95
Four chemicals cause respiratory problems. Each has a different P.E.L. Which is the most harmful?
P.E.L. 1 P.P.M.
P.E.L. 10 P.P.M.
P.E.L. 20 P.P.M.
P.E.L. 1,000 P.P.M.
Which sling angle would cause the most tension and strain on a sling?
5 degrees
30 degrees
45 degrees
W60 degrees
A guardrail system must withstand _________ of force.
100 pounds
200 pounds
300 pounds
400 pounds
A flash point is a __________.
Concentration
Temperature
Spark
Time period
About 36% of confined space deaths are _________.
Painters
Would be rescuers
Fire fighters
Farm workers
The four levels of confined space training required by OSHA are:
Attendant, Entry Supervisor, Entry Manager, Observer
Attendant, Entrant, Entry Supervisor, Observer
Entrant, Attendant, Entry Supervisor, Rescue Team
Entrant, Attendant, Entry Supervisor, Back-up Team
Explore all questions with a free account