No student devices needed. Know more
24 questions
(Click all that apply) What should you NOT wear in an environment that uses equipment?
goggles
necklaces
gloves
loose clothing
long, loose hair
(Select all that apply) When using the scroll saw, how should you secure the machine?
jig
clamps
round stock
bolts
When should the scroll saw be left unattended?
Never while out and turned on
Never while out and plugged in
Never while tension lever is back
Never when out and switched to on
(Select all that apply) What can happen when the wood is not placed flat on the work plate?
The saw can break
The blade can break
The cutting will be ugly
The cutting will be sloppy
Safety is a combination of operator ___________________ and ______________.
strength, skills
intelligence, awareness
common sense, alertness
knowledge, power
How long does it take for an accident to happen?
a split second
one second
thirty minutes to an hour
ten minutes
Take the time to read through all of the options. This question is repeated because it is very important!
What are the steps to insert a blade into the machine?
1- raise blade guard 2- loosen tension 3- remove red insert 4- teeth of blade point down 5- pull arm up 6- insert bottom 7- insert top
1- raise blade guard 2- loosen tension 3- remove red insert 4- teeth of blade point down 5- push arm down 6- insert bottom 7- insert top
(Select all that applies) What do you do when the blade jams?
turn machine off
call a teacher
take a step back
shift the blade into alignment
Take the time to read through all of the options. This question is repeated because it is very important!
What are the steps to insert a blade into the machine?
1- raise blade guard 2- loosen tension 3- remove red insert 4- teeth of blade point down 5- pull arm up 6- insert bottom 7- insert top
1- raise blade guard 2- loosen tension 3- remove red insert 4- teeth of blade point down 5- push arm down 6- insert bottom 7- insert top
Discuss visitor procedures in the work area.
Let them try out the machines, teach them how they work, let them try out a project
Have the students tell them about their projects, let the visitors help students
Ensure that they are wearing goggles, are alert, and don't talk to students
Do not let visitors in the area because they will be a distraction
Work areas should be kept ______ and ________-_______.
neat and sawdust-free
clean and distraction-free
Select all that apply.
In what environments should you not use power tools?
snowy
windy
cold
rainy
When should a user disconnect power tool from power source?
Switch is in the ON position, area is swept
Switch is in the OFF position, wet environment
Select all that apply.
What should a user check for before beginning a project?
safety gear is on
damaged parts
machine is secured to table
safety gear is off
saw table is flat
Who is able to repair the equipment?
Teachers
You, after proper training
Professionals
How does speed affect the work of the saw?
You can cut in a less messy manner.
You have more control, and it is safer.
You have less control, and it is more dangerous.
Select all that apply.
How should you cut a piece of wood that is too small to hold with your hands?
jig
jog
clamps
blade guard
READ ALL OF THE OPTIONS CAREFULLY.
When are you ready to turn on the saw?
Safety gear, wood is flat on the work surface, table is flat, machine is secured
Tension lever is in place, blade is aligned, machine is secured, safety gear is disabled.
The teeth of the blade should always be pointing in what direction?
up
down
sideways
What position should the tension lever be in when in use?
back
down
What can happen when the tool is unplugged and the on/off switch is in the ON position?
accidents will happen when you plug it back in
the blade will be damaged
Select all that apply.
What are two ways to support the wood while cutting?
hands
feet
blade guard
jig
How should you position round stock when cutting?
with the blade guard
in a jig
in a jog
Select all that apply.
How can distractions affect your work?
they can get you injured
they can make you feel sad
they can make you mess up
they can distract you
Explore all questions with a free account