Have an account?
Skip to Content
Build your own quiz
40 questions
Show Answers
See Preview
- 1. Multiple Choice
A symbol below the reference line means that ______________
the weld is on the arrow side
the weld is on the other side
the weld is below
the weld starts at the bottom
- 2. Multiple Choice
If a weld is to be welded on the arrow side, would it be A or B?
A
B
- 3. Multiple Choice
If a weld is to be welded on the other side, would it be A or B?
A
B
- 4. Multiple Choice
What is the correct way to show weld all the way around?
- 5. Multiple Choice
Click any that a Both Side Bevel Groove Weld Symbols
- 6. Multiple Choice
Click the Number for "Tail (Omitted when Reference is not used"
#12
#11
#8
#10
- 7. Multiple Choice
This symbol is to tell you to...
Fill the weld gap completely in one pass
Back weld the joint that you are welding
Plug the weld that you have
Spot weld the joint
- 8. Multiple Choice
This is to show you to do what on the T-Weld Joint?
You will alternate the location of the weld on each side; 2" welds 6" apart.
You will create one big weld over the entire joint; 2-6" big
You will located the welds directly across from each other; 2" welds 6" from the center of each
Bevel each corner to create a 2-6" weld
- 9. Multiple Choice
The weld look here should be...
Flat
Concave
Convex
- 10. Multiple Choice
The weld look here should be...
Flat
Concave
Convex
- 11. Multiple Choice
The weld look here should be...
Flat
Concave
Convex
- 12. Multiple Choice
This is to show you to do what on the T-Weld Joint?
You will alternate the location of the weld on each side; 2" welds 6" apart.
You will create one big weld over the entire joint; 2-6" big
You will located the welds directly across from each other; 2" welds 6" from the center of each
Bevel each corner to create a 2-6" weld
- 13. Multiple Choice
This symbol means...
You will weld all the way around the joint
You will weld this at the job site
You will weld this last
Start with this weld
- 14. Multiple Choice
This weld is also known as a...
Plug
Slot
Fillet
Bead
- 15. Multiple Choice
This groove weld is finished _______________.
flat
crowned
concave
convex
- 16. Multiple Choice
Click the name for all the parts to the welding symbol
Tail
Arrow
Process
Reference Line
- 17. Multiple Choice
Click the Number for " Specifications, Process, or Other Reference"
#12
#11
#9
#2
- 18. Multiple Choice
Click the Number for "Length of Weld"
#13
#14
#3
#4
- 19. Multiple ChoiceThe text found below the reference line is ...?Weld information for other sideVertical up lineWeld to be performed in the fieldWeld information for arrow side
- 20. Multiple Choice
Match the correct groove weld to the given symbol.
- 21. Multiple Choice
Match the correct groove weld to the given symbol.
- 22. Multiple Choice
Match the correct groove weld to the given symbol.
- 23. Multiple Choice
Match the correct groove weld to the given symbol.
- 24. Multiple Choice
Match the correct groove weld to the given symbol.
- 25. Multiple Choice
Match the correct groove weld to the given symbol.
- 26. Multiple Choice
Match the correct groove weld to the given symbol.
- 27. Multiple Choice
Match the correct groove weld to the given symbol.
- 28. Multiple Choice
Match the correct groove weld to the given symbol.
- 29. Multiple Choice
Match the correct groove weld to the given symbol.
- 30. Multiple Choice
What type of weld(s) should be made on other side?
Fillet weld only
Fillet weld and then a v groove
Fillet weld and then a single bevel
A single bevel and then a fillet weld
- 31. Multiple Choice
What type of line is the red arrow pointing to?
long break line
short break line
center line
coordinate line
- 32. Multiple Choice
Choose the best answer that represents the picture.
Plug weld; arrow side
Plug weld; other side
Plug weld; flush contour
Plug weld; 3/8" diameter
- 33. Multiple Choice
Choose the best answer that represents the picture.
Plug weld; 3/8" diameter
Plug weld; 3/8" depth of fill
Plug weld; other side
Plug weld; 3/8" pitch
- 34. Multiple Choice
Choose the best answer that represents the picture.
Plug weld; flush contour
Plug weld; other side
Plug weld; convex contour
Plug weld; in the field
- 35. Multiple Choice
Choose the best answer that represents the picture.
Plug weld; 3" pitch
Plug weld; other side
Plug weld; all the way around
Plug weld; 3" diameter
- 36. Multiple Choice
Choose the best answer that represents the picture.
Plug weld; 3/8" depth of filling
Plug weld; 3/8" diameter
Plug weld; other side
Plug weld; flush contour
- 37. Multiple Choice
choose best
- 38. Multiple Choice2a is referring to ...?Reference lineVertical up lineTailWeld this side line
- 39. Multiple Choice1 is referring to ...?Reference lineVertical up lineArrow connecting reference lineWeld all around symbol
- 40. Multiple Choice
The reference line is always horizontal.
True
False
- Answer choicesTagsAnswer choicesTags