No student devices needed. Know more
10 questions
All of the following are causes of a low brake pedal, except:
over adjusted parking brake
mechanical problem in the brake assemblies
inoperative brake adjusters
maladjusted master cylinder push rod
Technician A says all vacuum boosters can be rebuilt. Technician B says most shops install new or rebuilt vacuum boosters. Who is right?
A only
B only
Both A & B
Neither A nor B
Technician A says you can clean the hydraulic parts of a brake system with conventional parts cleaners. Technician B says you can clean brake parts in gasoline. Who is right?
A only
B only
A & B only
Neither A nor B
Technician A says many modern brake systems, especially those with ABS (anti-locking braking systems) provide on-board diagnostics. Technician B says no brake system has self-diagnostics. Who is right?
A only
B only
Both A & B
Neither A nor B
All of the following can cause brake pedal vibration, except:
hard spots on the brake disc
warped disc
out-of-round brake drum
air in the brake line
Technician A says brake pedal height is the distance from the pedal to the floor with the pedal fully released. Technician B says brake pedal free play is the amount of pedal movement before the beginning of brake application. Who is right?
A only
B only
Both A & B
Neither A nor B
Technician A says your should start bleeding at the wheel brake assembly farthest from the master cylinder. Technician B says some brake systems require special procedures when bleeding. Who is right?
A only
B only
Both A and B
Neither A nor B
All of the following are major operations needed for disc brake service, except:
rebuilding caliper assembly
replacing the wheel bearings
turning (machining) brake discs
replacing worn brake pads
Technician A says you should hang the caliper by a piece of wire if it is not being removed. Technician B says you can simply let the caliper hang by the brake hose. Who is right?
A only
B only
Both A & B
Neither A nor B
A wheel cylinder shows signs of leakage when its boots are pulled back. Technician A says the wheel cylinder must be removed before disassembly. Technician B says the wheel cylinder can often be serviced while bolted to the backing plate. Who is right?
A only
B only
Both A & B
Neither A nor B
Explore all questions with a free account