No student devices needed. Know more
30 questions
Torque is the measurement of
speed
pressure
output speed
turning force
Identify the component shown
rack and pinion steering rack
prop shaft
steering column
drive shaft
which component allows oil to flow within a steering rack
spool valve
Torsion bar
spliced shaft worm and rack
flow valve
what is the component shown ?
Adaptive air suspension unit
coil springs
leaf springs
torsion bar
Identify the axle system shown in the image
Solid beam
Salisbury
Floating hub
independent suspension
Prior to working on a steering system , what should be read
Repair time
Owners handbook
Parts catalogue
Workshop manual
Which suspension setup is commonly used in modern day vehicles
hydrostatic
leaf spring
Coil springs
harmonic dampers
A bounce test should be used to identify a fault with which of the following
Suspension springs
steering damper
Suspension dampers
ball joints
To check" toe angle" ,what equipment should you use
Clarks shoe sizer
protractor
Tracking gauges
Pressure gauge
Which terminology refers to the self centralising of the steering road wheels ?
Castor
Camber
KPI
Toe
The initials KPI stand for
King pressure inclination
King Pin Inclination
King pin increase
King pressure pipe
Which of the following will a worn suspension damper most likely cause ?
Vehicle to pull left
Excessive steering play
Low ride height
Excessive tyre wear
What is this component
single line
Tandem master cylinder
slave cylinder
Identify the type of cylinder shown below
Ceramic brake discs are most likely to be found on
bikes
tractors
high performance cars
trains
Worn brake discs should be replaced
as an axle set
singly
as a vehicle set
by heating up
Which brake component dissipates heat most efficiently
Drum brakes
Disc brakes
lead and trail shoes
transmission brakes
what tool should be used to check disc run out
steel rule
micrometer
Dial test indicator
vernier
After replacing a flexible brake hose , a technician should
road test the vehicle
return car to customer with an invoice
Pressurise the system to check for leaks
bleed the cylinder
Which of the following best describes" friction"
A force that slows or prevents movement
A force that speeds up and reduces friction
resistance that multiplies torque
resistance that reduces friction
When traction control is in operation ,braking pressure is applied to
the front wheels equally
back wheels equally
the wheel that is spinning
the wheel that is sationary
A seized brake caliper will cause vehicle to
brake evenly
pull to one side
steer erratically
under steer
what is shown in picture
cross-ply tyre
radial tyre
wheel barrow tyre
Space saver tyre
The sidewall markings of a tyre show 205/65/R15 .What does the 15 indicate ?
Aspect ratio
width of tyre
Rim diameter
type of tyre
why do wheel nuts have a tapered edge ?
to prevent ill fitting
to increase curb appeal
to centrally locate wheel
To increase surface area
To help reduce a vehicles unsprung weight , which of the following should be fitted
steel wheels
Alloy wheels
cross ply tyres
radial tyres
To check the condition of vehicle tyres, a technician should carry out a
visual inspection ,tyre depth and pressure check
bump test
pressure test
visual inspection
A tyre showing excessive wear patterns on each shoulder would indicate which of the following?
correct pressure
low pressure
high pressure
high speed rating
Balancing a wheel on a rotating wheel balancer is known as
static balancing
rotary balancing
Dynamic balancing
horizontal balancing
A positive wheel offset will give which of the following
A deeper dish of the wheel
positive offset gauge
larger aspect ratio
shallower dish of the wheel
What will cause a tyre to have excessive wear across the centre section of the tread pattern ?
under inflation
correct pressure
no air
Over-inflation
Explore all questions with a free account