No student devices needed. Know more
20 questions
Which voltage is applied to the paper to transfer the toner to the paper in an EP process laser printer?
+600VDC
–600VDC
+6000VDC
–6000VDC
Which types of printers are referred to as page printers because they receive their print job instructions one page at a time? (Choose two.)
Daisy wheel
Dot matrix
Inkjet
Laser
Thermal
Which of the following is not an advantage of a Universal Serial Bus (USB) printer interface?
It has a higher transfer rate than a serial connection.
It has a higher transfer rate than a parallel connection.
It automatically recognizes new devices.
It allows the printer to communicate with networks, servers, and workstations
Which type of printers can be used with multipart forms?
Inkjet printers
Laser printers
Thermal printers
Dot-matrix printers
Which step in the EP print process uses a laser to discharge selected areas of the photosensitive drum, thus forming an image on the drum?
Writing
Transferring
Developing
Cleaning
Which of the following are page-description languages? (Choose two.)
Page Description Language (PDL)
PostScript
PageScript
Printer Control Language (PC)L
What voltage does the corona wire or corona roller hold?
+600VDC
–600VDC
0VDC
–100VDC
Which device in an inkjet printer contains the print head?
Toner cartridge
Ink cartridge
Daisy wheel
Paper tray
What is the correct order of the steps in the EP print process?
Developing, exposing, transferring, fusing, charging, cleaning, processing
Charging, processing, exposing, developing, transferring, fusing, cleaning
Processing, transferring, exposing, developing, charging, cleaning, fusing
Processing, charging, exposing, developing, transferring, fusing, cleaning
Most printers that use the electrophotographic process contain how many standard assemblies?
Five
Six
Four
Nine
What is typically included in the EP laser printer toner cartridge? (Choose three.)
Toner
Print drum
Laser
Cleaning blade
What happens during the developing stage of laser printing?
An electrostatic charge is applied to the drum to attract toner particles.
Heat is applied to the paper to melt the toner.
The laser creates an image of the page on the drum.
An electrostatic charge is applied to the paper to attract toner particles
Which of the following are possible interfaces for printers? (Choose three.)
Parallel
PS/2
USB
Network
You have just installed a new printer. After it is installed, it prints only garbled text. Which of the following is likely the problem?
Wrong IP address
Worn print head
Incorrect print drivers
Unsupported printer
Which printer contains a wheel that looks like a flower with raised letters and symbols on each petal?
Inkjet printers
Daisy-wheel printer
Dot-matrix printer
Laser printer
What part of a laser printer supplies the voltages for charging and transferring corona assemblies?
High-voltage power supply (HVPS)
DC power supply (DCPS)
Controller circuitry
Transfer corona
Which printer part gets the toner from the photosensitive drum onto the paper?
Laser-scanning assembly
Fusing assembly
Corona assembly
Drum
Which step in the laser printer printing process occurs immediately after the exposing phase?
Charging
Fusing
Transferring
Developing
Which laser printer component permanently presses the toner into the paper?
Transfer corona
Fuser assembly
Printer controller circuitry
Paper transport assembly
Which of the following most accurately describes how to obtain a firmware upgrade for your laser printer?
Download the firmware upgrade for free from the manufacturer’s website.
Pay to download the firmware upgrade from the manufacturer’s website.
Have a certified laser printer technician come to your site and install a new firmware chip.
Contact the manufacturer of the printer, and they will send you the firmware upgrade on a CD.
Explore all questions with a free account