Have an account?
Skip to Content
Build your own quiz
Suggestions for you
13 questions
Show Answers
See Preview
- 1. Multiple ChoiceThe component that acts as a switching device within a starter motorCommutatorArmatureSolenoidPinion gear
- 2. Multiple ChoiceThe coil windings within a starter motor are held within which componentCommutatorArmatureSolenoidPinion gear
- 3. Multiple ChoiceThe device fitted to a starter motor to prevent it being driven by the flywheel once the engine has startedBushesRectifierOne way clutchPinion gear
- 4. Multiple ChoiceTransmits the drive from the starter motor to the engineBushesOne way clutchArmaturePinion gear
- 5. Multiple ChoiceWhen a starter motor begins to turn it produces a high….SpeedInertiaTorqueCharge
- 6. Multiple ChoiceThe gear ratio between the starter motor and the flywheel ring gear gives a reduction in…SpeedInertiaTorqueCharge
- 7. Multiple ChoiceWhat is the function of the starter solenoid?To slow down the starter motorTo drive the engineTo engage the shift lever
- 8. Multiple ChoiceWhere does the current, that flows through the solenoid contacts flow to?The hold in coilThe electric motorThe pull in coil
- 9. Multiple ChoiceWhats the main difference between a starter solenoid and a traditional solenoid?A starter solenoid supplies electricity to the electric motor as well as mechanical movement to the drive lever and pinionA starter solenoid requires intensive maintenanceIn a starter solenoid a large current is switched by a small current
- 10. Multiple ChoiceWhich of the following is not a part of the starter solenoid?Hold in coilPull in coilIron coreSafety coil
- 11. Multiple ChoiceDuring a starter current-draw test the following results were noted: Voltage—9.4 volts. Current draw—363 amps. The specifications for the maximum current draw are 180 amps.Technician A says the test results indicate that the battery may be defective and should be tested.Technician B says the test results indicate a faulty natural safety start switch circuit.Both are correct.Neither are correct
- 12. Multiple ChoiceA 600-mV drop is measured across the starter motor solenoid while the engine is being cranked. What is the repair?Replace the battery.Replace the starter motor.Confirm cable connections.
- 13. Multiple ChoiceQuick starter test results.
If when you have the head lights on and you try and start the engine and the lights stay bright. What might be the problem?Probably caused by a poor battery connectionBattery may be dischargedMay be caused by an engine mechanical conditionPossibly caused by an open circuit - Answer choicesTagsAnswer choicesTags